SWF K Series

55--1133
[Exercise 5.3.1-1] Conduct the design preview for
““
63.SST
””
saved in the floppy diskette
and copy it in #12 Room.
󱀣 In <Fig. 5.3.1-2>, select and press .
Then, the window appears as in <Fig. 5.3.1-3>.
SELECT
F7
[Fig. 5.3.1-2] [Fig. 5.3.1-3]
󱀥 Select the room number.
Use the Room Up/Down buttons , to select the room number. When the buttons are pressed,
the empty rooms are displayed in order. Select #12 Room.
F2
F1
󱀤 Press .
As in <Fig. 5.3.1-4>, the design is displayed on the pre-view window.
PREVIEW
F1
[Fig. 5.3.1-4]