SWF K Series

55--4499
(3) Needle color
This function is to easily show the needle bar (color) change-related information on the design by marking colors
on each needle bar. It does not affect the actual embroidery work.
<Fig. 5.4.4-16> appears when the needle bar color is pressed.
Use the number buttons to select the desired needle bar, and then <Fig. 5.4.4-17> appears where colors can be
chosen. Press the desired color for selecting it, and then the color confirmation section is changed with the color
chosen. If the color is what you wanted, press .
SELECT
F7
On the color change window in <Fig. 5.4.4-17>, use the frame speed key to adjust the cursor move speed.
[Fig. 5.4.4-16]
[Fig. 5.4.4-17]