SWF K Series

55--5599
④ Enter the number of the needle bar equipped with the boring within the range of permissible values.
To correct the entered data, press . To cancel, press .
⑤ Press .
This completes the boring setting.
PREVIOUS
F8
(3) Boring setting
① Press on the main function menu.
② Select Options Setting on the setting screen and press .
③ Select “8. Boring Needle” and press .
<Fig. 5.4.6-12> appears for setup.
SELECT
F7
SELECT
F7
SETTING
F3
[Fig. 5.4.6-12]