6
II. Setting up the instrument
Avoid placing the instrument in locations exposed to direct sunlight, dust,
vibration, high temperature and high humidity.
Operating environment
●
Indoor use
●
Altitude: Max 2000 meters
●
Ambient temperature: 15°C to 35°C
●
Maximum relative humidity: 75% for temperature up to 31°C decreasing
linearly to 50% relative humidity at 40°C
●
Supply voltage uctuations: Not to exceed ±10% of the normal voltage.
●
Pollution degree: 2 (in according with IEC60664)
●
Installation / Overvoltage category: 2 (in according with IEC60664)
●
Air pressure of 75kPa to 106 kPa
●
Avoid frost, dew, percolating water, and rain
III. Assembling the microscope
1. Verifying input voltage
●
The 5V microscope input can works with a broad range of USB power
sources. However, always use the provided automatic voltage selection
power adapter or own adapter, portable power device that are rated for
the voltage used in your area, microscope input and that has been
approved to meet local safety standards.
●
In order to prevent electric shock, always turn the power switch on the
power supply o before connecting the power cord.
●
Electrical specications:
AC adapter: 100-240V 50/60 Hz (Included)
Microscope Input: Type-C 5V/2A by AC adapter or portable power device
(not included)
2. Illumination
●
LED illumination
LED Illumination Specication:
To Next Page
Loading...
Need help?
General
