Sym MaxSym 600i ABS Service Manual

13. Body Cover
13-7
Loosen 2 bolts from the front cover under side.
Loosen 2 screws and 2 bolts from the front cover
upper side.
Disconnect the headlight, foggy light and winker
light couplers.
Remove the front cover.
Installation
Install in reverse order of removal procedures.
Winker & foggy light coupler
4 bolts
Each side 1 screw
Each side 1 bolt
To this chapter contents
Headlight coupler

Sym MaxSym 600i ABS Specifications

General

Brand	Sym
Model	MaxSym 600i ABS
Category	Scooter
Language	English