SYM 5. REMOVAL OF ENGINE
5-5
Remove the rear brake cable nut.
Remove the rear brake cable.
Remove the rear shock absorber lower bolt.
Loose the strap screw of engine left guide,
and then remove the engine left guide.
Remove the engine suspension nuts and
bolts (engine side), and then remove the
engine.
Caution
Check if the engine suspension, rear shock
absorber bushing, and cushion rubber for
damage. Replace them with new ones if
so.
Ÿ With a bracket to support the engine to
prevent from it damage by falling down
as removing the engine.
Bushing
Strap screw of guide
Engine suspension nuts
Brake cable nut
To Next Page
Loading...
Need help?
General
