THE CONTROL OF THROTTLE VALVE HANDLE
Acceleration : To increase speed. When riding
on an inclined road, turn the throttle
valve handle slowly to allow the
engine to output its power.
Deceleration : To decrease speed.
Maintenance Performance-During the initial period, it is better to ride in low speed for running
the engine in good condition and long life.
During the first month or first 1,000 km, never excess 80km/h.
Avoid abrupt acceleration.
Avoid engine running in RPM (over 8,000RPM) while under no load.
Never Making Abrupt Braking Or Making A
Full Turn.
Make braking or making a full turn may cause wheel
slip.
When riding in wet or rainy conditions, making abrupt
braking or making a turn may cause wheel slip, may
lose control of the motorcycle.
Extreme Caution When Riding In Rainy
Condition.
When riding in wet or rainy. Conditions needs longer
distance to stopping the motorcycle. Slow the
motorcycle down early to brake.
When descending a grade, close the throttle fully and
use both brakes to slow the motorcycle
To Next Page
Loading...
