■ Any previously applied software updates
■ Items not included in the checkpoint:
■ The backup data is not included.
After you have reviewed the list of actions, click Validate to continue with the rollback
operation.
The Rollback Appliance pop-up window appears. This pop-up informs you that
once you start the rollback process, it is irreversible. Click Yes to proceed with the
rollback operation. Click No to stop the rollback process.
NetBackup appliance catalog corruption
Catalog corruption may have occured if you lose the ability to perform backups and
restores or you are not seeing images being backed up.
Use the following steps as a guide to recover a corrupt catalog on the appliance.
Table 11-9
Steps for recovering from catalog corruption on the appliance
DescriptionActionSteps
An appliance factory reset returns your
appliance to a clean, unconfigured, and
default state.
You can choose to retain the storage
configuration and backup data during this
process to avoid reconfiguring the
appliance after a factory reset.
See “Starting a factory reset from the
appliance shell menu” on page 159. for a
detailed procedure on performing a factory
reset.
See "Appliance factory reset" in the
Symantec NetBackup Appliance 2.6
Administrator's Guide for more information
on the topic of factory reset.
Perform a factory reset on the
appliance while retaining the
storage configuration and backup
data.
Step 1
158Disaster Recovery
Disaster recovery scenarios
To Next Page
Loading...
