Table 2-1
Sections in the best practices chapter (continued)
LinkDescriptionSection
See “About Fibre Channel
HBA card configuration
verification” on page 22.
This section provides the
steps to verify the installation
and configuration of a SAN
Client Fibre Channel HBA
card.
About Fibre Channel HBA
card configuration verification
See “About Notification
settings” on page 23.
This section provides the
importance for enabling the
Notification and Registration
setting.
About Notification settings
See “ About the IPMI
sub-system” on page 24.
This section provides a brief
description on why IPMI
sub-systems are vital and
need to be configured for your
appliance.
About the IPMI sub-system
See “About password
management and recovery”
on page 25.
This section provides the
steps to be followed to
recover your password.
About password management
and recovery
See “About IPv4-IPv6-based
network support” on page 26.
This section provides the
guidelines for configuring the
IPV4 and IPV6 addresses.
About IPv4 and IPv6 network
support
See “About enabling BMR
options” on page 27.
This section provides a brief
description on the application
and benefits of enabling the
BMR options when the
appliance is configured as a
master server.
About enabling BMR options
See “Interpretation of some
of the fields of vxprint output
from NetBackup Appliances”
on page 27.
This section provides an
explanation of how to
interpret the vxprint output.
Interpretation of some of the
fields of vxprint output from
NetBackup and PureDisk
appliances
See “About deleting LDAP or
Active Directory users”
on page 29.
This section provides the
precautions you need to take
while deleting LDAP or Active
Directory users from the
NetBackup Appliance.
About deleting LDAP or
Active Directory users
18Best practices
About best practices
To Next Page
Loading...
