Symantec netbackup 5030 - Page 35

Table 3-2
Log files collected by the Collect Logs Wizard (continued)
What is collected?Log Type
Appliance logs including upgrade, hardware, event logs and so on. The
following Appliance logs are collected:
■ hostchange.log, selftest_report*
■ Logs created by the CallhomeDataGather utility.
■ config_nb_factory.log, iso_postinstall.log, sf.log
■ patch_*, upgrade_* logs
■ NetBackup Appliance VxUL (Unified) logs, which include:
■ All
■ CallHome
■ Checkpoint
■ Common
■ Config
■ Database
■ Hardware
■ HWMonitor
■ Network
■ RAID
■ Seeding
■ SelfTest
■ Storage
■ SWUpdate
■ Commands
■ CrossHost
■ Trace
Note: The NetBackup Appliance unified logs are not the same as the
NetBackup unified logs, such as nbpem or nbjm. NetBackup Appliance
has its own set of unified logs. To collect the NetBackup unified logs,
select NetBackup in the Collect Logs Wizard.
Appliance
Operating system logs that include the following:
■ boot.log
■ boot.msg
■ boot.omsg
■ messages
Operating
system
35About Software Troubleshooting Tools
Troubleshooting and tuning Appliance from the Appliance Diagnostics Center