5-88
LS 5700/LS 5800 Product Reference Guide
Hand-Held Laser Scanner Options
Program Primary Scanner Only
LS 2603MX/LS 3603MX/LS 3203 Only
When this mode is enabled, parameter bar codes
scanned only change the settings on the primary scanner
(LS 5700/LS 5800). They do not affect the hand-held laser
scanner. Any changes made to the decode parameters (i.e.,
code types, lengths or check digits) are reflected back to the
hand-held scanner as well. This mode is useful for
programming the primary scanner using the hand-held
scanner.
PROGRAM PRIMARY SCANNER ONLY
To Next Page
