5-168
LS 5700/LS 5800 Product Reference Guide
Custom Tailoring
Primary Decode Session Time
This parameter sets the maximum time decode processing
continues during a scan attempt. It is programmable in 0.1
second increments from 0.1 to 9.9 seconds. (Setting this
between 1.0 and 3.0 seconds is recommended.)
Scan the bar code below to select a new time-out. Next scan
two numeric bar codes on pages 5-246 to 5-255, the first
representing seconds, the second tenths of seconds. If you
make an error, or wish to change your selection, scan
CANCEL on page 5-256.
DECODE ATTEMPT DURATION
To Next Page
Loading...
