4-9
Maintenance and Spcifications
Parameter Menu Scanning
Lo/hi tone Input error, incorrect bar code or
“Cancel” scanned, wrong entry,
incorrect bar code programming
sequence; remain in program mode.
Hi/lo tone Keyboard parameter selected. Enter
value using bar code keypad.
Hi/lo/hi/lo tone Successful program exit with change
in the parameter setting.
Serial Communication
1 Beep - short high tone Serial communication was
successfully received, then
transmitted to the host.
4 Beeps - short high tone Serial communications error.
Hi/hi/hi/hi Parity error.
Table 4-5. Beeper Definitions (cont’d)
Beeper Sequence Indication
To Next Page
Loading...
