Symmetricom 58503B User Manual

Contents
iv Getting Started Guide
To Power Up the Receiver 1-15
To Understand the Receiver Status Screen Data 1-17
Installing the Automated SatStat Program for Continual
Status Updates 1-18
Operating the Automated SatStat Program 1-19
Customizing the Receiver Operation 1-20
Using Commands to Control Key Functions
(Examples) 1-21
To Perform Basic Installation and Simple Customizing 1-21
If required, restore all of the Receiver’s internal settings to
their factory shipment values by invoking a system
preset. 1-21
Initiate “surveying”, an automatic determination of the
Receiver’s antenna position. 1-22
Set the Receiver’s to compensate for the length of the
antenna cable. 1-22
Set the Receiver’s to exclude satellites which appear below a
specified elevation angle. 1-23
Set the Receiver’s to display local time rather than UTC
time. 1-23
To Install With a Limited View of the Sky,
To Bypass Position Survey Operation 1-23
2 Features and Functions
Chapter Contents 2-2
Inputs 2-4
Antenna Input 2-4
Recommended Antenna Cable Assemblies 2-4
Antenna Cable Length Delay 2-5
POWER Input 2-7
58503B GPS Time and Frequency Reference Receiver 2-7
59551A GPS Measurements Synchronization Module 2-7
Time Tagging Inputs (59551A Only) 2-7
Outputs 2-8
1 PPS (One-Pulse-Per-Second) Output 2-8
1 PP2S (One-Pulse-Per-Two-Seconds) Option 002 Output
(58503B Only) 2-8
Programmable Pulse Output (59551A Only) 2-8
IRIG-B Output (59551A Only) 2-8
Alarm BITE Output (59551A Only) 2-11
Alarm Output (58503B Only) 2-11
10 MHz OUT Output (58503B Only) 2-11

Symmetricom 58503B Specifications

General

Brand	Symmetricom
Model	58503B
Category	GPS
Language	English