Sys Tec Electronic USB-CANmodul - Technical Data; CAN Interface Specifications; USB Interface Specifications

To Next Page

To Previous Page

Introduction



SYS TEC electronic GmbH 2001 L-487e_6

Technical Data:

! CAN interface:

Meets CiA DS 102 Standard

Optically isolated voltage supply

2 jumpers for configuration of the CAN voltage supply (optically

isolated via CAN bus, or via USB bus)

Connection to the CAN bus via DB-9 plug

Supports CAN frame format according to specifications for CAN

2.0A and 2.0B (11- and 29- bit CAN identifier)

! USB interface:

USB connector B in accordance to the USB standard

Optional power supply through the USB bus (100mA in

operating mode)

Transmission type: Bulk, 12MBit/s

! Power and Status LED

! Case size: 120 x 60 x 30 (L x W x H; in mm)

! Operating temperature 0°C...+55°C

! Conforms to CE standard

Software Support:

! Kernel-Mode driver for Windows 98/2000:

USBCANLD.SYS for easy firmware download to the USB-

CANmodul

USBCAN.SYS supports the various functions of the USB-

CANmodul

! User-Mode driver for Windows 98/2000:

USBCAN.DLL for easy use of the USB-CANmodul functions

! Up to 10 USB-CANmoduls can be supported by these drivers

! Tools for Windows 98 / 2000:

UCAN Config – administration of more than one USB-

CANmodul by allocation of device numbers

PcanView(USBCAN) – CAN monitor program

! Demo program in C source code