Chapter 2 Safety Information
SA-90 Instructions for Use
19/
46
(3)
(4)
WG-90
(1)
(2)
• Do not insert your hand or other object into the rack feed-out arm while it is in operation.
There is a risk of injury.
• Do not feed a sample rack into the right pool of the CN-3000, CN-6000, CN-3500 or CN-6500 during
transportation.
There is a risk of the sample rack toppling.
• To avoid electrical shock, always unplug the power cable before servicing.
There is a risk of electrical shock.
• Replace the fuse only with a fuse of the specified type and rating.
There is a risk of smoke emission and fire.
There is a risk of infection from pathogens and other contaminants if any part or surface of the instrument is
touched.
When closing the door, take care not to pinch your fingers.
There is a risk of injury.