SYSMEX SA-90 - Installation Environment; Grounding

Chapter 5 Installation
SA-90 Instructions for Use
27/
46
5.3 Installation environment
For installation environment, see the following.
(³P. 1 4 "Chapter 2: 2.2 Installation", P. 29 "Chapter 6: 6.1 Specifications")
5.4 Grounding
The power cable of the instrument must be connected to a properly grounded power outlet. An appropriate adaptor
plug and power cable should be used according to your region.
For details, please contact your authorized local representative.
Caution
If the temperature/humidity is outside the installation environment range, correct analysis results may not
be obtained.
Warning
• Always ground this instrument.
Improper grounding may cause electrical shock.
• Use caution not to exceed the capacity of the outlet.
Otherwise, a fire may result.
Caution
Use the Sysmex-specified power cable. Do not use the Sysmex-specified power cable for any equipment
other than the instrument.