SYSMEX SA-90 - Chapter 3 Part Names and Functions

Chapter 3 Part Names and Functions
SA-90 Instructions for Use
21/
46
Chapter 3 Part Names and Functions
This chapter provides an external view and a summary of each parts of this instrument.
3.1 SA-90
(1) Rack feeder
Place sample racks in this feeder. A maximum of 20 racks can be placed at the same time.
When system analysis (sampler analysis) starts, the sample racks are automatically fed to the analysis
line.
For details, see the CN-3000, CN-6000, CN-3500 or CN-6500 "Instructions for Use".
(
³
CN-3000 and CN-6000 Instructions for Use, "Chapter 13: 13.2.22 Option sampler connection settings")
(
³
CN-3500 and CN-6500 Instructions for Use, "Chapter 13: 13.2.22 Option sampler connection settings")
(2) Transport line
Transports sample racks laterally.
This line transports sample racks from the rack feeder to the CN-3000, CN-6000, CN-3500 or CN-6500.
The line also transports sample racks from the left sampler pool to the rack collector.
(3) Rack collector
A maximum of 20 sample racks that have completed analysis can be stored in the collector.
(4) Left sampler pool
Feeds sample racks received from the CN-3000, CN-6000, CN-3500 or CN-6500 to the transport line.
(5) Rack feed-in arm
Feeds sample racks that have completed analysis from the transport line to the rack collector.
(6) Rack feed-out arm
Feeds sample racks on the transport line out to the CN-3000, CN-6000, CN-3500 or CN-6500.
(9)
(1)
(6)
(3)
(10)
(4)
(2)
(8)
Top view
Rear view
(5)
(11)
(7)