Chapter 1 Introduction
SA-90 Instructions for Use
7/
46
Chapter 1 Introduction
Thank you for purchasing the Option Sampler SA-90.
Please read this manual carefully before operating this product.
In this manual, the Option Sampler SA-90 is abbreviated as "SA-90".
Keep this manual in a safe place for future reference.
In vitro diagnostic medical device
Contact Addresses
1-5-1 Wakinohama-Kaigandori, Chuo-ku, Kobe 651-0073, Japan
Authorized Representatives
Europe, Middle East and Africa
Bornbarch 1, 22848 Norderstedt, Germany
Phone: +49 40 5 27 26-0 / Fax: +49 40 5 27 26-100
Responsible person for United Kingdom of Great Britain and Northern Ireland
Oxford Gene Technology (Operations) Ltd.
Begbroke Science Park, Begbroke Hill, Woodstock Road,
Begbroke, Oxfordshire, OX5 1PF, UK
Asia-Pacific
9 Tampines Grande #06-18 Singapore 528735
Phone: +65-6221-3629 / Fax: +65-6221-3687
Ordering of Supplies and Replacement Part
If you need to order supplies or replacement parts, please contact your
authorized local representative.
Service and Maintenance
Please contact your authorized local representative.
The system described in this manual is marked with the CE mark, which
confirms compliance with the applicable requirements of:
• Regulation (EU) 2017/746 on in vitro diagnostic medical devices
• Directive 2011/65/EU on the restriction of the use of certain hazardous
substances in electrical and electronic equipment and its related amending
directives including (EU) 2015/863 amending Annex II of Directive 2011/65/
EU
The system described in this manual is compliant with the Medical Devices
Regulations 2002.
To Next Page
Loading...