34
Rev. 12GB0712
SYSTEMA S.p.A.
AIRTIGHT GAS CONVECTORS
5 PUTTING THE DEVICE OUT OF USE
6 SCRAPPING
has not been received.
c) The user has not reported with fault within 10 days
of discovering it.
4.2.3 Competence
1) Operations under Guarantee must be requested,
on pain of expiry, to the S.C. that carried out
“Commissioning”. In this case the user must show
the S.C. the Guarantee Certificate.
2) The S.C. will take action during normal working
hours, depending on its own organisation necessi-
ties.
4.2.4 Operativity and effectiveness of
the guarantee
1) In order to make the Guarantee operative and
effective, the user must:
a) Ask the installer for the name of the S.C. for
“Commissioning”.
b) Show the Guarantee Certificate to the personnel in
charge, completing it in all parts and asking the
S.C. to apply the stamp and sign it in the spaces
provided.
4.2.5 Responsibility
The customer relieves the supplier of all responsibility
for accidents for damage that may occur to the machi-
nes or the plants during operation. The supplier is
responsible to the buyer only he guarantee obligations
specified above.
4.2.6 Legal disputes - Territorial compe-
tence and rights of the parties
It is established that the competent court is the Court of
Padua (Italy), even in the case of action for connection
or call under guarantee. The loss of a suit does not exo-
nerate the buyer from the obligations to make payment,
which must be fulfilled according to contract, until the
final decision is made by the Legal Authority.
Whenever the device will not be used for a long period
of time, we recommend performing the following opera-
tions:
Set the main power switch in the “O” position and dis-
connect the device from the electrical power mains.
Close the gas supply line valve and disconnect the devi-
ce from the gas supply mains.
ATTENTION! Please make sure that all opera-
tions of deconnecting are performed by
authorized personnel.
Whenever this device will no longer be used, we recom-
mend making it inoperative by disconnecting it from the
electrical power and gas mains removing the control
panel.
We also recommend making harmless all parts that may
constitute sources of risk.
Remove the entire electrical system by observing the
laws in force regulating the elimination of such materials.
ATTENTION! Please make sure that all opera-
tions of deconnecting are performed by
authorized personnel.
Scrap the rest of the device as scrap metal and take it to
an authorized collection center for such materials.
To Next Page
Loading...
