SystemBase Portbase-3010 - Advanced Settings

Portbase User Guide
4) Advanced Settings
Set the operation modes and the connection restriction for the server (FTP, HTTP, TELNET) running
in Portbase
 FTP server (Default: Enabled)
Determine if the FTP server will be used in Portbase.
 WAN side HTTP access (Default: Yes)
Determine whether the Client request for the Portbase HTTP server through the WAN port will
be accepted or denied.
 WAN side FTP access (Default: Yes)
Determine whether the Client request for the Portbase FTP server through the WAN port will be
accepted or denied.
 WAN side TELNET access (Default: Yes)
Determine whether the Client request for the Portbase TELNET server through the WAN port
will be accepted or denied.
41