Portbase User Guide
4
COM Port Redirector
1. Redirector Introduction
Redirector is a network COM port driver, enabling serial ports of Portbase to operate the same way as the
local COM ports of PC.
Upto 255 COM ports can be registered in one PC if Redirector is used.
1) Supported Hardware
Portbase 3010 / 3010F / 3020 / 3020F / 3040 / 3080 / 3160 / 3161
2) Supported Operating Systems
COM Port Redirector for Windows 98/ME
COM Port Redirector for Windows 2000/XP/2003
3) System Requirements
PC system requirement for running Redirector is as follows.
CPU : Pentium 100 MHz or higher
Memory : 16 Mb or more
CD-ROM : Faster than 4X
Network : 10M Ethernet or higher
57
To Next Page
Loading...