Portbase User Guide
All environment settings are completed by the set of commands shown.
With the command set “view”, you can view new settings, and with the command set “reboot”, Portbase is
restarted so that new settings are affected.
When Portbase is restarted, the first serial port of Portbase tries to establish connection to socket 2000 in
the server, PC1. This action is defined by the commands received beforehand.
In the PC1, a server program waiting for the connection to socket 2000 must be running.
After the connection is acknowledged, data input by the server program is transferred to the serial device
attached to the first serial port of Portbase. And of course, all data sent from the serial device is
transferred to the server program. All these data transmission is accomplished via network.
56
To Next Page
Loading...