T-Touch Retail Application A1.10
3. OPERATION
3.1 Basic Operations
3.1.1 Power on
Press and hold key until to hear a beep sound. It will take around 30 seconds for to run the TOS operating
system and application software.
3.1.2 Standby
Press key for to keep display standby / sleep. Press ON/OFF key again for to turn on the display.
3.1.3. Power off
Press and hold key until to show a Power Off window. Touch option YES to power off or NO to back to use.
3.1.4. Reboot
Hold key 10 seconds, the system will reboot to recover from abnormal situation.
3.2. Panel Key Functions
Press key for to turn to power ON, power OFF, standby and
system restart
Press key for to go to the menu operation, a menu table will
be show at the bottom of the display.
Press key 5 seconds from any 5 in 1 operation can get back
to home display
Press key for to tare the scale. The weight that was
displayed will be store as the tare value and that value will
be subtracted from the measurement, leaving zero on the
display. The "Net" indicator will be on.
Press key to set the reading to zero (within the allowed
range of 2%max). Usually it’s required only when the
platform is empty. When the zero point is obtained, the zero
indication will be show
To Next Page
Loading...
Need help?
General
