Expanding Your Computer 4-5
Connecting an IR Device
Your computer has an IR (InfraRed) port for connecting an infrared-
equipped device wirelessly such as a wireless keyboard/mouse, another
computer, printer, or PDA (Personal Digital Assistant).
The infrared feature supports these standards:
For the front panel’s IR port
IR keyboard/mouse that supports Forward FK34PUS002 (US
language) specification
For the left side’s IR port
IrDA 1.1 (FIR – Fast Infrared) with 9.6 Kbps to 4.0 Mbps transfer
rate
HPSIR – Serial Infrared mode
Follow this procedure to connect an IR device:
1. Under Windows, make sure that the IrDA Fast Infrared Port is set to
HP HSDL-2300/3600. (See “How to Use the CD” in Chapter 6 for
information.)
2. Make sure that the COM Ports and its Mode Setting for COM2
items are set properly in the SCU program. (See “Advanced Menu”
in Chapter 5 for information.)
3. When using the front panel’s IR port:
Place the wireless keyboard where its IR port faces the IR port of
your computer within the effective range − within ±15-degrees
vertical angle and within ±30-degrees horizontal angle at no greater
than 3 meter distance.
To Next Page
Loading...