Name: Tait TB7100
Brand: Tait
Rating: 5 (1 reviews)

To Next Page

To Previous Page

2 Multitone Paging Interface Fitting Instruction

Contents

1.1 Personal Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Equipment Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Tools and Equipment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.4 Parts Required. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.5 Disassembly and Reassembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.6 Programming. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

1.7 Set-up Tx Channel Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.8 Set-up Programmable Audio I/O . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.9 Set-up Programmable Digital I/O. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

1.10 Program Key Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1.11 Transmit Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1.12 Set Fan Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.13 User Interface Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.14 Final System Check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1.15 Final Reassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Associated Documentation

MAS-02731-01-xx Multitone Paging Transmitter Service Manual

All available Multitone Paging Interface/Transmitter documentation is TaitWorld Support web site.

Consult your nearest Tait Dealer or Customer Service Organisation for more information

Tuning and Configuration

Once the Multitone Paging Interface is fitted, you will need to tune the base station before

operating it. To do this you will need to use the Calibration and Program Application software to

configure your base station to suit the requirements of your radio system. Refer to the Calibration

Application and Program Application documentation for full details on these procedures. The

Calibration and Programming Software will be available from the TaitWorld Support web site.

Tait TB7100 Fitting Instruction

Other manuals for Tait TB7100