26 Operating in conventional mode
Selecting a channel or scan group by using
the Main menu
1 Select Menu>Channels.
2 In the Channels menu, scroll
through the list of channels and
scan groups until the channel or
scan group you want appears.
3 Press Done.
If you have selected a scan
group, the amber LED glows and
the scanning icon appears in
the icon bar.
Selecting a channel or scan group by using
your Quick Access menu
1 Press one of the scroll keys
or to open the
Channels menu.
2 Scroll through the list of chan-
nels and scan groups until the
channel or scan group you
want appears.
3 Press Done.
If you have selected a scan
group, the amber LED glows and
the scanning icon appears in
the icon bar.
To Next Page
Loading...
