Tait tm8200 User Guide

28 Operating in conventional mode
Selecting a zone by using your Quick
Access menu
1 Press one of the scroll keys or to open the
Zones menu.
Alternatively, the left selection
key may be programmed as your
Quick Access menu. In this case,
press the left selection key
to access the Zones menu.
2 Scroll through the list of zones
until the zone you want appears.
3 Press Select.
Your radio may now display the zone information in
two ways:
— the zone icon appears in the icon bar
— the zone indication appears below the
channel information.
Checking that a channel is clear
You or your user group may be segregated from other user
groups by special signalling. If an incoming call carries the
special signalling tones specific to you or your user group,
your radio’s signalling mute opens and you can hear the call.
These tones may not be audible.
The monitor function allows you to override any special
signalling on a channel, so that you can check that the chan-
nel is clear before you make a call.
zone
information

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz