Tait tm8200 User Guide

46 Installation planning
— fuse holders
— receptacles for a remote speaker (speaker not included)
— BNC or mini-UHF antenna plug.
Installation tools
The following installation tools may be required:
■ portable drill and drill bit
■ Pozidriv screwdriver
■ 8mm (5/16 inch) socket (or Pozidriv screwdriver)
■ BNC or mini-UHF crimp tool
■ fuse crimp tool
■ in-line RF power meter capable of measuring forward and
reflected power at the operating frequency of the radio.
Microphone clip installation tools
The following installation tools may be required for installing
the microphone:
■ centre punch
■ drill bit
■ Pozidriv screwdriver
■ hammer.
Selecting the mounting position
Inspect the vehicle and determine the safest and most
convenient location for mounting the radio.
The installation must meet the following requirements:
■ sufficient clearance behind the radio for the heatsink
and cables
■ a large enough flat surface so that the mounting bracket
will not be distorted
■ no danger of the radio interfering with air
bag deployment.

Tait tm8200 Specifications

General

Operating Temperature Range	-30°C to +60°C
IP Rating	IP54
Channel Spacing	12.5 kHz, 25 kHz
Battery Life	N/A (Mobile Radio)
Frequency Range	136-174 MHz, 400-470 MHz