2-12
CONTROLS
SWITCHES
STARTER SWITCH
SWITCHES
IMPORTANT: Do not repeatedly switch
the key from OFF to ON and ON to OFF
over a short period. Doing so will cause
engine breakdown.
PREHEAT Position for preheating the engine.
OFF ......... Position for stopping the engine
and inserting or removing the key.
ON .......... Position in which the engine is
running. At this position, all the
electrical equipment is functional.
START ..... Position for starting the engine.
When the key is released, the
switch automatically returns to the
ON position.
HORN BUTTON
Press the button situated on the right
operating lever to blow the horn.
TRAVEL SPEED SWITCH
Press this switch to set the travel speed to
2nd (high) speed. Press it again to return to
1st (low) speed.
To Next Page
Loading...
Need help?
General
