Takeuchi TB210R User Manual

6-8
TROUBLESHOOTING
RESTARTING AFTER ADDING
FUEL
BLEEDING AIR FROM THE FUEL SYSTEM
IMPORTANT: NEVER use the starter
motor to crank the engine in order to
prime the fuel system. This may cause the
starter motor to overheat and damage the
coils, pinion gear and/or ring gear.
IMPORTANT: If the engine stalls due to
fuel shortage, add fuel, turn the key to the
ON position for 60 seconds, and then turn
it to the START position. Running the
starter for a long time before there is
enough fuel is going through can cause
the starter to fail.
RESTARTING AFTER ADDING FUEL
1. Add fuel.
2. Turn the starter key to the ON position and
hold it for about 60 seconds.
For machines without a pre-fuel filter

Takeuchi TB210R Specifications

General

Brand	Takeuchi
Model	TB210R
Category	Excavators
Language	English