Maintenance Chart
Maintenance Items See page
* : If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
Walk-Around Inspection
Inspecting by opening the engine hood, mud guard and covers 102
Inspecting by walking around the machine 103
Inspecting while sitting in the operator’s seat 103
Daily Inspection (Every 10 Hours)
Inspecting and replenishing the coolant 104
Inspecting and replenishing the engine oil 105
Inspecting the water separator 105
Checking the fuel level 106
Inspecting the hydraulic oil level and replenishing 106
Lubricating the working equipment 108
After First 50 Hours (New Machines Only)
Replacing the hydraulic oil return filter 109
Replacing the engine oil and oil filter 110
Inspecting and adjusting the fan belt 111
Every 50 Hours
Inspecting and adjusting the crawler tension 112
Lubricating the slew bearing 113
Lubricating the slew motor pinion 114
Inspecting the battery fluid level and replenishing 114
Draining the fuel tank 115
Every 100 Hours
Cleaning the fuel filter 116
Cleaning the water separator 116
After First 100 to 250 Hours (New Machines Only)
Replacing the travel motor gear oil* 117
To Next Page
Loading...
