Service Data
Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the chart below.
�
Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance
has deteriorated severely.
�
Whenever possible, use the same brand of lubricant as before. If changing with a different brand,
replace the entire quantity – do not mix different brands.
Lubricants and greases
*:
For water, use tap water (soft). Do not use well or river water. When the ambient temperature
drops below 0°C, add coolant (antifreeze). Follow the coolant manufacturer’s instructions to
determine the mixture ratio.
Part Type
Type by temperature
-22 -4 14 32 50 68 86
104
°F
-30 -20 -10 0 10 20 30 40
°C
Replacement
interval
Capacity
Lit (US. qt.)
Engine
oil pan
Diesel engine
oil
API - CD
After first 50 hrs.
Every 250 hrs.
Upper limit:
3.4 (3.6)
Lower limit:
1.8 (1.9)
System: 38
(10 US.gal.)
Tank: 25
(6.6 US.gal.)
Hydraulic
tank
Antiwear
hydraulic oil
Every 2000
hrs.
***
Engine
cooling
system
Coolant
(water +
coolant)*
Every 1000 hrs.
3.5 (3.7)
Travel
reduction
gear
Gear oil
API-GL-4
SAE 90
After first 100
to 250 hrs.**
Every 1000 hrs.
Slew motor
pinion
Slew
bearing
Working
equipment
Levers and
pedals
Lithium
based
grease
EP-2
NLGI No. 2
Every 50 hrs.
Every 50 hrs.
Daily or every
10 hrs.
When required
As required
0.35 (0.37)
each
SAE 5W-20
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
50% coolant mixture
30% coolant mixture
ISO VG46
Takeuchi
genuine
hydraulic oil
46
Every 4000
hrs.***
To Next Page
Loading...
