Operating Precautions
Check for safety in the
surrounding area before starting
Understand the machine limitations.
Use a signal person where clearances
are close or your vision is obstructed.
Never allow anyone to enter the slew
(swing) radius and machine path.
Signal your intention to move by
sounding the horn.
There are blind spots to the rear of the
machine.
If necessary, swing the cab around before
backing up to check that the area is safe
and clear.
Ensure good visibility
When working in dark places, turn on the
machine’s working lights and headlights
and/or provide extra stationary lighting if
necessary.
When visibility is poor due to severe
weather (fog, snow or rain), stop
operating the machine and wait until
conditions improves.
Do not permit riders on the
machine
Do not allow anyone to ride on any
part of the machine at any time while
traveling.
Do not allow anyone to be on any part of
the machine while operating.
To Next Page
Loading...
