Doors and Covers
Starter Key
The starter key is used not only to start and
stop the engine, but also to lock and unlock
the following places:
�
Engine hood
�
Mud guard
�
Manual storage compartment
�
Cab door
�
Left side cover
Cab Door
WARNING
When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move.
Open the door fully and press it against the
catch at the back of the door to lock it in
place. Always lock the door when mounting
and dismounting and when operating the
machine.
Lock and unlock
1. Insert the starter key and turn it.
Opening and Closing
1. Grasp the handle (1) and push the button
(2).
2. Slide the door fully rearward (forward).
3. Press the door against the catch at the
back (front) of the door to lock it in place.
To open (close) the door from inside the cab
1. Pull the lever (3) to release the lock.
2. Grasp the handle (4) and slide the door
fully rearward (forward).
3. Press the door against the catch at the
back (front) of the door to lock it in place.
To Next Page
Loading...
