Maintenance Precautions
Prepare the work area
� Select a firm, level work area. Make sure
there is adequate light and, if indoors,
ventilation.
�
Clear obstacles and dangerous objects.
Eliminate slippery areas.
Stop the engine before performing
maintenance
� Avoid lubrication or mechanical
adjustments with the machine in
motion or with the engine running while
stationary.
�
If maintenance must be performed with
the engine running, always work as a
two-person team with one person sitting
in the operator’s seat while the other
works on the machine.
• When performing maintenance, be sure
to keep your body and clothing away
from moving parts.
Always clean the machine
� Clean the machine before performing
maintenance.
�
Stop the engine before washing the
machine. Cover the electrical parts
so that water cannot enter. Water on
electrical parts could cause short-circuits
or malfunctions. Do not use water or
steam to wash the battery, electronic
control components, sensors, connectors
or the operator’s compartment.
Stay clear of moving parts
� Stay clear of all rotating and moving
parts. Wrapping or entanglement may
result in serious injury or death.
�
Keep hands, clothing and tools away
from the rotating fan and running fan
belts.
To Next Page
Loading...
