Maintenance Precautions
Securely block the machine or any
component that may fall
� Before performing maintenance or
repairs under the machine, set all working
equipment against the ground or in the
lowermost position.
�
Securely block the tracks.
�
If you must work beneath the raised
machine or equipment, always use wood
blocks, jack-stands or other rigid and
stable supports. Never get under the
machine or working equipment if they are
not sufficiently supported. This procedure
is especially important when working on
hydraulic cylinders.
Secure the engine hood or guard
when opened
Be sure to secure the engine hood or guard
when opening it. Do not open the engine
hood or guard on slopes or in strong wind.
Cautions on tilting up the platform
� Raising or lowering the platform while the
engine is running may cause the machine
to move, and cause serious injury or
death. Lower the working equipment and
stop the engine before raising or lowering
the platform.
�
When the floor is tilted up, support it
firmly with the stopper to prevent it from
falling.
Place heavy objects in a stable
position
When removing or installing the hoe
attachment, place it in a stable position so
that it does not tip over.
Securely block the working
equipment
To prevent unexpected movement, securely
block the working equipment when
repairing or replacing the cutting edges or
bucket teeth.
To Next Page
Loading...
