EasyManua.ls Logo

Takeuchi TB23R - CAUTIONS DURING REMOVAL AND INSTALLATION OF PIPING; HANDLING OF SEALS

Takeuchi TB23R
190 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
SAFETY
General Precautions
Exhaust fumes from the engine
can kill
Do not operate the engine in an enclosed
area without adequate ventilation.
If natural ventilation is poor, install
ventilators, fans, exhaust extension pipes
or other artificial venting devices.
Handling asbestos dust
Inhaling asbestos dust has been linked
to lung cancer. When handling materials
which may contain asbestos, take the
following precautions:
Never use compressed air for cleaning.
Avoid brushing or grinding of the
materials.
For clean up, use wet methods or a
vacuum equipped with a high efficiency
particulate air (HEPA) filter.
Wear an approved respirator if there is
no other way to control the dust. When
working indoors, install a ventilation
system with a macro molecular filter.
Be careful not to get crushed or
cut
Never put your hands, feet or other parts
of your body between the upperstructure
and the undercarriage or tracks, between
the machine body and working equipment,
or between a cylinder and moving part.
The size of these gaps change when the
machine moves and if caught a person can
suffer severe injury or death.
Using optional products
Consult with a Takeuchi before installing
optional attachments.
Do not use attachments that have not
been approved by Takeuchi. Doing so
may compromise safety or adversely
affect the machines operation or service
life.
Takeuchi will not be held responsible for
any injuries, accidents or damage to its
products caused by the use of a non-
approved attachment.
Never modify the machine
Unauthorized modifications to this machine
can cause injury or death. Never make
unauthorized modifications to any part of
this machine.

Table of Contents

Other manuals for Takeuchi TB23R

Related product manuals