When Required
� Side cutter
Installation
1. Insert the bolts from the inner of the
bucket and tighten the nuts.
• Tightening torque: 241 N·m (178 ft-lb)
2. Caulk the bolts with a punch at three
spots along the periphery of the screw to
prevent the nuts from coming loose.
Inspecting and Replenishing the
Windshield Washer Fluid
Use a windshield washer fluid designed
specifically for motor vehicles. Follow the
instructions including with the washer fluid.
Inspection
1. Open the rear cover (R.H.).
2. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishment
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer
fluid.
3. Reinstall the cap (2).
To Next Page
Loading...
