Radio (for EU)
Clock
Display mode change ................................1
The display on the unit can be changed by
pushing the button
. Pushing button
alternates the display between time and
radio/tape. Press the CLOCK button
to
switch between the clock and audio display.
When a radio or tape function is performed
while the time display is selected, the audio
display will appear for 10 seconds, then the
display will return to the time mode.
Adjusting the time ..............................1, 2, 3
To adjust the time, press the TUNE/SEEK
or button while pressing the
CLOCK button
.
To adjust the hour, press the
button.
To adjust the minutes, press the
button.
To advance the time rapidly, hold the
or
button continuously.
Clock reset ..............................................1, 4
Press preset button 6
while holding the
CLOCK button to skip to the nearest half-
hour as follows:
Example: 3:00 ~ 3:29
3:00
3:30 ~ 3:59
4:00
Supplement: This unit uses a 12-hour
clock.
The clock function and radio presets are
retained in memory when the audio is
switched off.
+
C4C033
DIR
ATP
TUNE/SEEK
CLOCK
1
2 3
4
5
6
P SCAN
ー
.
B A N D
24 1 3
To Next Page
Loading...
