Load Safety Device
Overload Warning Device
If a weight greater than the machine is
designed to lift is lifted, the overload
warning device is activated and a horn is
sounded (when the overload warning switch
is turned on).
WARNING
Continuing to apply the load after the
overload warning horn sounds could
result in the machine tipping over or
the emergency shut-off valve being
activated. If the horn sounds, stop
operating the machine and lighten the
load.
Overload warning switch (2)
O
position ...... OFF
I
position ...... ON
When the emergency shut-
off valve is activated, the
overload warning horn
stops.
(This is because the pressure
sensor can no longer detect
hydraulic pressure.)
To Next Page
Loading...
