Seat and Seat Belt
Seat Belt
CAUTION
Always fasten the seat belt securely
before starting the engine.
Fastening the seat belt
1. Adjust the seat to the optimum position
for operating, raise your torso, and sit
back firmly into the seat.
2. Press the button (1) to release the seat
belt and pull the seat belt to the desired
length.
3. Make sure that the belt is not twisted and
then insert the tongue plate (A) into the
buckle (B) of the seat belt until you hear a
clicking sound as it locks in place.
4. Press the button (1) to fasten the belt until
you can feel the pressure on your pelvis
with the belt firmly in place.
Releasing the seat belt
1. To remove the seat belt, simply press the
red button (C) located on the buckle(B).
2. Hold the tongue plate (A) and press the
button (1).
The seat belt is automatically stowed
away.
To Next Page
Loading...
