Levers and Pedals
Blade Lever
Use this lever to operate the dozer blade.
(A) .......Blade up
(B) .......Blade down
Refer to page 72 “Operating the Dozer
Blade”.
Travel Levers
WARNING
Before operating the travel levers, check
to make sure that the dozer blade is
to the front of the operator’s seat. BE
AWARE that when the dozer blade is to
the rear of the operator’s seat, the travel
levers operate in the opposite direction
to when the dozer blade is in the front.
Use these to move forward and backward
and to change directions.
Refer to page 68 “Operating the Travel
Levers”.
Pedal Locks
WARNING
When not using the pedals, set the pedal
locks to the locked position. Stepping on
a pedal accidentally when it is not locked
may lead to unexpected accidents.
These devices are for locking the swing and
auxiliary pedals.
Set the pedal locks over the pedals to lock
them.
To Next Page
Loading...
