140
TROUBLESHOOTING
If a Warning Lamp Flashes
Error Code List
The five error codes are displayed (the leftmost code is the most recent error). If an error code
is display on the multidata display, consult a Takeuchi sales or service outlet.
Error details
Error Code No.
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
Short-time operations (0.5 seconds or less) of the key switch are
repeatedly recorded.
After the engine starts, the engine oil pressure drops below the specified
level (oil shortage).
After the engine starts, the charge alternator malfunctions.
The engine overheats (water temperature exceeds 107 ºC).
The air cleaner filter becomes clogged.
Emergency release operation is recorded.
Excess ignition time (15 seconds or more) of the glow plug is recorded.
The battery voltage becomes too high (it exceeds 30 V for one second or
more).
The battery voltage becomes too low (it drops below 12 V for one second
or more).
The emergency release signal state changes from ON to OFF.
A real-time lock error occurs. Reset operation is recorded. The battery
voltage drops for too long, and the CPU time function is reset.