To Next Page
R
Robert BrownOct 25, 2025
What to do if my Takeuchi Excavators engine is overheating?
- NNancy CabreraOct 25, 2025
If your Takeuchi Excavators engine is overheating, first park the machine in a safe place. Check if the engine oil pressure/coolant level warning lamp is flashing or if there is steam coming out when the engine hood is closed. If there is steam, stop the engine immediately and contact a Takeuchi sales or service outlet for repairs. If the engine oil pressure/coolant level warning lamp is off, run the engine at low idle and let the water temperature decrease. Once the water temperature gauge drops to the green zone, stop the engine. Then, perform the following inspections and procedures: * Adjust fan belt slack * Add coolant level * Repair water leakage * Clean radiator fins * Clean sediment in cooling system If the problem persists after these steps, contact a Takeuchi sales or...
General