64
OPERATION
Before Starting Operation
Walk-Around Inspection
Perform the walk-around inspections once a
day before starting the engine the first time
that day.
Perform the inspections as described under
“Maintenance - Walk-Around Inspection”
(pages 98 and 99).
Daily Inspection
Perform the daily inspections once a day
before starting the engine the first time that
day.
Perform the inspections as described under
“Maintenance - Daily Inspection” (pages 100
to 104).
Mounting and Dismounting
WARNING
Do not jump on or off the machine.
Never attempt to mount or dismount a
moving machine.
When mounting and dismounting the
cab, first open the door fully to the
locked position and check that it does
not move.
Always face the access system and
maintain a three point contact with
the recommended handrails and steps
while getting on and off the machine.
Keep steps and platform clean.
Never use the safety lock lever or
control levers as hand holds.
To Next Page
Loading...
Need help?
General