38
CONTROLS
Doors and Covers
Starter Key
The starter key is used not only to start and
stop the engine, but also to lock and unlock
the following places :
Fuel filler cap Engine hood
Cab door Battery cover
Side cover
Cab Door
WARNING
When mounting and dismounting the
cab, first open the door fully to the locked
position and check that it does not
move.
Open the door fully and press it against the
catch at the back of the door to lock it in
place. Always lock the door when mounting
and dismounting and when operating the
machine.
Lock and unlock
1. Insert and turn the starter key.
Opening
1. Pull the knob (1) towards you and open
the door.
To open the door from inside the cab,
push the lever (2) to the front.
2. Open the door fully and press it against
the cab to lock it in place.
Closing
1. Either push release lever (3) to the front or
lower release lever (4).
2. Close the released door.
To Next Page
Loading...
Need help?
General