51
CONTROLS
Switches
Starter Switch
IMPORTANT: Do not repeatedly switch
the key from OFF to ON and ON to OFF
over a short period. Doing so will cause
engine breakdown.
OFF ..........Position for stopping the engine
and inserting or removing the
key.
ON ........... Position in which the engine
is running. At this position,
all the electrical equipment is
functional.
When the coolant temperature is
low, the glow plugs are energized
and automatic preheating is
done.
START ...... Position for starting the engine.
When the key is released, the
switch automatically returns to
the ON position.
Engine Shutdown Switch
Use to shutdown the engine if it fails to stop
when the starter switch is set to the OFF
position due to machine failure or breakage.
1. Lift the front part of the cover (1).
2. Raise the lever (2) of the switch.
3. After use, lower the front part of the cover
(1) to return the lever (2) to the lower
position.
Throttle Controller
This controls the engine speed.
(A) .......Low idling
(B) .......Middle speed
(C) .......Maximum speed
To Next Page
Loading...