142
TROUBLESHOOTING
Other Symptoms
For symptoms not included on the table below or if the problem persists after the proper
procedures have been taken, consult a Takeuchi sales or service outlet.
Symptom Main cause Procedure
Control levers do not
move smoothly
Insufficient grease on left and
right control levers
Add grease.
Refer to page 126.
Safety lock lever is raised
Fuse is blown
Dumping, swinging or
traveling operation not
possible
Lower the safety lock lever.
Refer to page 54.
Replace the fuse.
Refer to page 136.
Dumping or swinging
force is insufficient
Insufficient hydraulic oil level
Hydraulic oil is not heated
Air cleaner is clogged
Hydraulic oil is not of suitable
type
Replenish to the prescribed
level.
Refer to page 103.
Perform the warm-up
procedure.
Refer to page 69.
Clean the air cleaner.
Refer to page 114.
Replace the hydraulic oil.
Refer to page 122.
Traveling is not possible
or not smooth
Stones or foreign objects are
stuck
Remove the foreign object.
Machine does not travel
straight forward
Stones or foreign objects are
stuck
Remove the foreign object.
Travel speed cannot be
changed
Fuse is blown Replace the fuse.
Refer to page 136.
Swinging is not possible
or not smooth
Insufficient grease on swing
bearing
Add grease.
Refer to page 115.
Hydraulic oil
temperature is too high
Insufficient hydraulic oil Replenish to the prescribed
level.
Refer to page 103.
To Next Page
Loading...
Need help?
General