C-2
SAFETY ALERT SYMBOL
This symbol means Attention! Be Alert! Your Safety Is Involved.
The message that follows the symbol contains important information
about safety.
Read and understand the message to avoid personal injury or death.
It is the owner or employer’s responsibility to fully instruct each operator in the proper
and safe operation of all equipment. All persons using this machine should thoroughly
familiarize themselves with the following sections.
A
ll operators must be instructed on the proper functions of the dump carrier before
running the machine.
L
earn and practice correct use of the machine controls in a safe, clear area before
operating this machine on a job site.
Improper operation, inspection and maintenance of this ma-
chine can cause injury or death.
Read
and understand this manual before performing any op-
eration, inspection or maintenance on this machine.
Always store this manual near at hand preferably on the machine itself. If it should be lost or
damaged, immediately order a new one from your Takeuchi dealer.
When transferring ownership of this machine, be sure to provide this manual to the next
owner.
Takeuchi supplies machines complying to the local regulations and standards of the
country of export. If your machine has been purchased in another country or from a person
or company of another country, it may not have the safety devices or safety standards
required for use in your country. Should you have any question about whether your machine
complies with the regulations and standards of your country, contact a Takeuchi dealer.
Please note that the contents and diagrams included in this manual may not match your
machine exactly.
CAUTION
To Next Page
Loading...
Need help?
General